REVOTION

Bulltron Polar (2026) integration

€178
Tax included. Plus shipping costs if applicable Shipping calculated at checkout.

Your Bulltron Polar in the app: SOC, SOH and cell voltages live - with remote access, connected straight to the battery.

Product details

  • Your Bulltron in detail: State of charge, remaining time, current, power and voltage live in the app - straight from your Bulltron's BMS
  • Battery health at a glance: SOH, cell voltages (min/max), cell temperatures and charge/discharge limits tell you early whether your battery is in good shape
  • Remote access from anywhere: Via the BRAIN® with LTE-M you check your Bulltron on the road too - no extra gateway
  • Straight to the battery: The type A adapter cable in the bundle plugs directly into your Bulltron's CAN port - you don't need an extra Victron cable
  • Battery as a trigger: Since the October 2026 update, state of charge and cell voltages can trigger automations that run locally on the BRAIN®, for example switching off large loads before the battery is discharged too deeply
  • BRAIN® required: NODE® Connect + type A adapter cable (30 cm) in the bundle; the NODE® Connect needs a separate 12/24 V supply
  • Already running a Cerbo GX on your Bulltron? Then choose the VE.CAN battery integration CAN-BMS - its Y-adapter cable passes the signal through to your Cerbo GX
Compatibility

Devices you can connect.

After installation, you control all listed devices directly in the REVOTION app.

12V Polar series

  • Bulltron 100Ah Slim Polar
  • Bulltron 105Ah Polar
  • Bulltron 165Ah Polar
  • Bulltron 170Ah Polar
  • Bulltron 185Ah Polar
  • Bulltron 210Ah Polar
  • Bulltron 230Ah Polar
  • Bulltron 270Ah Polar
  • Bulltron 320Ah Polar
  • Bulltron 460Ah Polar

12V under-seat Polar

  • Bulltron 350Ah Untersitz Polar
  • Bulltron 540Ah Untersitz Polar
  • Bulltron 750Ah Untersitz Polar

Your Bulltron. Finally in your SmartHome.

Bulltron builds LiFePO4 leisure batteries, among others for campers and motorhomes - and with the Revotion integration you get everything out of yours. The system reads what is happening inside the battery directly from the CAN-BMS and shows it next to heating, tanks and lights in one app.

More data than the battery app shows.

State of charge, remaining time, current, power, voltage - plus state of health (SOH), cell voltages, cell temperatures, charge and discharge limits and total lifetime energy. Especially with a high-quality lithium battery, a deeper look pays off: you see early whether everything is in the green.

Straight to the battery.

You plug the type A adapter cable from the bundle directly into your Bulltron's CAN port. It has the same connector as the Victron cable “VE.Can to CAN-BMS type A” - so you don't need an additional cable. The NODE® Connect gets the data bus via the Molex connector and talks wirelessly to the BRAIN®. If a Victron Cerbo GX is already running on your Bulltron, choose the VE.CAN battery integration CAN-BMS instead: its Y-adapter cable passes the signal through to your Cerbo GX.

One bundle. Everything for the integration.

NODE® Connect plus type A adapter cable - that's all you need to bring your Bulltron into the Revotion system. No manufacturer cable, no Cerbo GX. Plug in, pair, done. ECE R10 certified - legal to use while driving.

FAQ

Answers to frequently asked questions

What's in the box?

1x NODE® Connect
1x adapter cable type A battery direct (CAN-BMS, approx. 30 cm)
1x NODE® Connect connection guide

NOTE: The NODE® Connect needs a separate 12 V or 24 V power supply. Running a Victron Cerbo GX in parallel is not possible with this cable - for that, choose the VE.CAN battery integration CAN-BMS with Y-adapter cable.

Which devices are compatible?

Compatible are the current Bulltron models with a CAN port:

12V Polar series: Bulltron 100Ah Slim Polar, 105Ah, 165Ah, 170Ah, 185Ah, 210Ah, 230Ah, 270Ah, 320Ah and 460Ah Polar.
12V under-seat Polar (Untersitz): 350Ah, 540Ah and 750Ah.

Not compatible: models without a CAN port, e.g. starter, mover and Clesana batteries as well as older Bulltron generations without a CAN port. For these batteries, the NODE® Battery with its own shunt is the right choice.

Good to know: The type A adapter cable in the bundle plugs directly into the Bulltron's CAN port, no extra Victron cable needed. The BMS combines Bulltrons connected in parallel and provides them as one bank - one bank needs one NODE® Connect. If a Victron Cerbo GX should run in parallel, choose the VE.CAN battery integration CAN-BMS with Y-adapter cable.

Rule of thumb: What a Victron Cerbo GX shows as a CAN-BMS battery can, as a rule, also be read by Revotion.

Bulltron, Victron Energy and Cerbo GX are trademarks of their respective owners. They are named only to describe compatibility.

Shipping and returns
Shipping

Here you'll find all information about shipping from the REVOTION Store.

Shipping costs

Shipping in the REVOTION Store is free for all orders over €100. In the cart you can see how much is missing for free shipping.

Shipment information

All REVOTION products are shipped via our partner DHL. After the shipping confirmation you receive an email with a tracking number, so you always know where your parcel is.

Normally, an order is always combined into one shipment. If that is not possible, you receive a second shipping email with a second tracking number.

For each shipment the following is shown:

  • Order number: You'll find your order number under My account > Order history
  • Items of your order: You can also see the items of your order in the order history
  • Tracking number: As soon as your order has shipped, you'll also find the parcel tracking number in your overview to follow your order.

Standard shipping within Germany takes approx. 1-3 working days after the shipment is prepared.

If the order could not be delivered, it is returned to our warehouse. The amount can then be refunded or the order can be delivered again, as you prefer. Depending on your bank, it may take several days until the refund shows up in your account.